[757labs] Anti-static strap
trevorl.salad at gmail.com
Thu Nov 3 12:12:48 EDT 2011
On my bench I just use a strip of copper tape around my work area that's
grounded to my bench power supply. I've also used stripped magnet wire
wrapped around my wrist (well, I melted the insulation off it first), and
plain'ol'wire to a power supply grounding point... I think the rule is
"high resistance at ground, low resistance at the hand". You could probably
use some conductive thread from a wearable project, wrap it around a 1M
resistor and wrap that around an exposed pipe and you'll be just fine.
On Thu, Nov 3, 2011 at 11:42 AM, Michael Olson <olson at irinim.net> wrote:
> **Radio Shack probably has them.
> -- Mike
> James Blandford <barron.james at gmail.com> wrote:
>> Does anyone have an extra strap they are willing to part with ? Or of
>> some place that sells them cheaply besides priest because they are out.
> 757labs mailing list
> 757labs at 757labs.org
> If we knew what we were doing it wouldn't be research.
Failure is just success rounded down. - T-Rex
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the 757labs