[757labs] Submarine fabrication

[David Hagn]

I agree.  After all ours should actually go under water as well or at least on top ;)  
I mean with tunnel and bridge traffic the way it is.
In the meantime this does get me thinking about the Grand Illumination Parade....


________________________________
From: Kyle Kroskey <solareon at gmail.com>
To: 757labs at 757labs.org
Sent: Wednesday, June 29, 2011 10:32 PM
Subject: Re: [757labs] Submarine fabrication


I think we need to wait a bit for 757Labs Heavy Industries.


On Wed, Jun 29, 2011 at 5:07 PM, Steve Nelson <snelson at webapper.com> wrote:

Apparently all these parts were cut with some sort of sophisticated CNC laser. I'm not sure if sharks were attached to the lasers or not.
>
>
>http://www.facebook.com/media/set/?set=a.1902734281464.2108176.1034918880
>
>
>I'm pretty sure we need a submarine car like this. 
>
>Steve
>_______________________________________________
>757labs mailing list
>757labs at 757labs.org
>http://757labs.org/cgi-bin/mailman/listinfo/757labs
>If we knew what we were doing it wouldn't be research.
>


-- 
Thanks,
Kyle Kroskey
solareon at gmail.com

_______________________________________________
757labs mailing list
757labs at 757labs.org
http://757labs.org/cgi-bin/mailman/listinfo/757labs
If we knew what we were doing it wouldn't be research.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://757labs.org/pipermail/757labs/attachments/20110630/17358f65/attachment-0001.html>