[757labs] RepRap Status (@Angus)

[Geoff]

So Ethan and i were looking over the files for the Bits to Bytes RepRap
trying to figure out the deal with the piece we're missing (part 5 in the
attached image). I've managed to find the part in the DXF files but it oddly
has some lines drawn through it. The plans call for routing out some
portions to allow for bolts to fit between two plates (parts 1 & 5 in the
image) but it looks like the routed out area is actually part of the plans
which would lead to a mess when trying to cut it i would think.

I _think_ the attached DXF is the right file (don't have anything that can
open it on here). Maybe someone can confirm my suspicion that this piece
would get cut wrong as it stands now (maybe that's why it's missing?)

/Geoff
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://757labs.org/pipermail/757labs/attachments/20100928/7547942f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: extruder.png
Type: image/png
Size: 187165 bytes
Desc: not available
URL: <http://757labs.org/pipermail/757labs/attachments/20100928/7547942f/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: extruder-3mm-laser-cut-acrylic.dxf
Type: image/vnd.dxf
Size: 71490 bytes
Desc: not available
URL: <http://757labs.org/pipermail/757labs/attachments/20100928/7547942f/attachment-0001.bin>